this is the instruction to reflash your lexia interface:(1) install the [ PSA Interface Checker Install.exe ] , after installation you will get 3 new shortcuts on desktop(2) connect your lexia interface to your computer by USB cable , no need to connect to car, install the driver for the interface automatically(3) run the [ PSA Interface Checker ] from desktop, click ACTIVATE,(4) click Version of the selected file (APPLI.com), select vci_updater.com file, click Download the Flash App, wait for a few seconds untill the flash is done (when the flash is done successfully, the greem light/LED on your lexia interface will keep flashing )*** This step is for reflashing which will change the serial number of your lexia interface from Revision B to Revision C also with the original Evolution Driver !*** If the reflashing procedure only takes 1 second in your side , usually that means the
9780.z5 Interface Driver
DiagBox usually checks the firmware (1) on the VCI ,every time it starts, and upgrade/downgrade as necessary. But this (checking) functionality has been disabled in maitresox releases. I normally leave it enabled and wrote a post on how to restore this automated function (together with the necessary files). However, you can use PSA interface checker to perform it manually.
If you could not find the exact driver for your hardware device or you aren't sure which driver is right one, we have a program that will detect your hardware specifications and identify the correct driver for your needs. Please click here to download.
The MTS 6513 VCI is a cost-optimized variant designed specifically to accommodate applications that require only High Speed CAN and K-Line physical ECU interfaces. For additional standalone capability it consists of an integrated display and keypad.
Unlike other universal car scanner tools which only read fault codes; this software performs nearly ALL the functions like the original dealer diagnostic tool. Our diagnostic interface contains K-Line multiplexor, CAN-BUS interfaces and SAE J1850 bus (both PWM and VPW).
Install Diagbox V7.83 for Lexia 3 PP2000 on Windows:a) Microsoft .NET 3.5 SP1 Framework (needed for Diagbox 7.60+)b) All necessary drivers (usually covered by the Guest Additions/VMWare Tools)c) Setup a network adapter (does not need to be connected to network)d) Mozilla Firefoxe) Winrarf) Virtual CloneDrive (not needed for Virtual Machines) 2ff7e9595c
Comments